Technical data

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. C
OPERATOR’S GUIDE
117 of 138
DirectSet Command / Menu Item Description
3+ : Flip
(35X/22X) Rotates the SpeedDome 180° from its current
pointing direction. This is the same as pressing the Flip
button.
4+ : Peel Pattern
(35X/22X) Runs the default Apple Peel Pattern
continuously.
5+ : Set North Position
(35X/22X) Sets the North Position
6+ : Line Lock Off
(35X/22X) Turns the Line Lock Off
7+ : Line Lock On
(35X/22X) Turns the Line Lock On
10+ : Night Mode
(35X) Sets the dome IR mode setting to ON. The dome
switches to full-time black-and-white (B/W) mode.
11+ : Day Mode
(35X) Sets the dome IR mode setting to OFF. The dome
switches to full-time color mode.
12+ : Auto/Day Night Mode
(35X) Resumes the most recently selected automatic IR
mode setting.
Auto High: B/W mode activates ~30 lux.
Auto Mid: B/W mode activates ~3 lux.
Auto Low: B/W mode activates ~ 0.5 lux.
13+ : WDR On
(35X) Enables Wide Dynamic Range (WDR). Use this
setting when both bright and low light areas need to be
viewed simultaneously.
14+ : WDR Off
(35X) Disables Wide Dynamic Range (WDR). Use this
setting when the light level is constant or changes in
lighting conditions are gradual.
15+ : Smooth Scan
(35X/22X) Initiates a smooth scan between the left and
right scan limits, starting at the left scan limit. If no scan
limits have been set, initiates a smooth 360° clockwise
rotation around the dome axis using the current tilt, zoom
and focus settings.
16+ : Stepped Scan
(35X/22X) Initiates a scan between the left and right scan
limits pausing briefly every 10° (at 1x zoom), starting at the
left scan limit. When the right scan limit is reached, the
scan is reversed. If no scan limits have been set, initiates a
clockwise rotation around the dome axis pausing briefly
every 10° (at 1x zoom) for 3 seconds using the current tilt,
zoom and focus settings.
17+ : Random Scan
(35X/22X) Initiates a scan between the left and right scan
limits pausing randomly between the limits. If no scan
limits have been set, initiates a clockwise or counter-
clockwise rotation around the dome axis using the current
tilt, zoom and focus settings. The dome pauses randomly as
it rotates around the axis.
20+ : Dome Information
(35X/22X) Displays the Dome Information screen available
through the dome configuration menu.
48+ : EIS Off
(35X) EIS Off
49+ : EIS 5Hz
(35X) EIS 5Hz
50+ : EIS 10Hz
(35X) EIS 10Hz