Technical data

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. C
OPERATOR’S GUIDE
115 of 138
Supported Controllers
The following AD-UTC controllers are compatible with the SpeedDome Ultra 8 camera dome:
Controller Presets Patterns DirectSet Menu
ADCC0200 96 3 Yes
ADCC0300 96 3 Yes
This list of controllers is complete as of the time of publication. Other controllers may be
supported. Contact your Sales Representative for current information.
Performance Notes
The following considerations should be made when using the SpeedDome Ultra 8 camera
dome in the AD-UTC environment.
Address Setting
The SpeedDome Ultra 8 camera dome must be set to address 891 to operate in the AD-UTC
environment. When the dome initializes or resets, the address and protocol information
(UTC_T) appear on-screen.
Accessing the DirectSet Menu
The DirectSet Menu provides easy access to certain SpeedDome Ultra 8 camera dome
functions from the keyboard. Both the 35X and 22X camera domes each have four pages of
settings available.
To access the DirectSet menu, select the dome, and press
(DirectSet button).
35X Camera Dome
DirectSet Menu 1of 4 DirectSet Menu 2of 4
11 DAY MODE
12 AUTO DAY/NIGHT MODE
13 WDR ON
14 WDR OFF
15 SMOOTH SCAN
16 STEPPED SCAN
17 RANDOM SCAN
20 DOME INFORMATION
48 EIS OFF
Use FOCUS to select page
0 TOGGLE DIRECT SET MENU
1 DOME CONFIGURATION MENU
2 AUTO IRIS & AUTO FOCUS
3 FLIP
4 PEEL PATTERN
5 SET NORTH POSITION
6 LINE LOCK OFF
7 LINE LOCK ON
10 NIGHT MODE
FOCUS FAR=next page