Technical data

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. C
OPERATOR’S GUIDE
112 of 138
Figure 94. Presets screen
IMPORTANT
If using the WV-CU550A Controller with the WJ-SX550 Multiplexer, you must
press F3 (A. Res) to adjust the zoom, focus, or iris settings. This places the
controller in normal navigating mode. Make the necessary adjustments. When
finished, press F1 (On) to resume menu mode.
8. Press Set to save the Preset information.
9. To program more Presets, repeat steps 5 through 8. To exit the Dome Configuration Menu
and save changes, press F4 (Exit).
To verify the Preset programming, enter a Preset number (1-64) and press Preset.
Tested Panasonic Equipment
The following Panasonic equipment has been tested with the SpeedDome Ultra 8 camera
dome:
• WJ-X550 Multiplexer
• WV-CU550A Controller
PRESETS
Position camera with PAN,
TILT, ZOOM and IRIS
FOCUS FAR to save and exit
EXIT