Technical data

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. C
OPERATOR’S GUIDE
111 of 138
Figure 92. Alarms / Areas / Home / Presets / PTZ screen
5. Use the joystick to move the highlight to Presets. Press Set to select. The Select Preset
to Program screen appears.
Figure 93. Select Preset To Program screen
6. Use the joystick to select the Preset you want to program. If the Preset has been
programmed the dome automatically moves to that position.
• Move the joystick right to increase the preset number.
• Move the joystick left to decrease the preset number.
When the correct Preset number appears, press Set to begin programming.
7. The Presets screen appears. Use the joystick to adjust the dome to the correct pan/tilt
position.
SELECT PRESET TO PROGRAM
PRESET
NUMBER PRESET NAME
1 PRESET 1
MOTION DETECTION SETUP
SEQUENCE SETUP MENU
CAMERA FUNCTIONS
FOCUS FAR to program preset
EXIT
ALARMS/AREAS/HOME/PRESETS/PZ
SET ALARM ACTIONS
SET ALARM STATES
SET HOME POSITION
SET NORTH POSITION
AREA BOUNDARIES
PRIVACY ZONES
PRESETS
SCAN LIMITS
EXIT