Technical data

SPEEDDOME ULTRA 8 CONFIGURATION UTILITY 8200-0600-01, REV. C
OPERATOR’S GUIDE
99 of 138
VM8
Supported Protocol SensorNet
Maximum Presets 0
Maximum Patterns
(1)
1
DirectSet Menu Not supported
Address Range 1-8
Notes:
(1) Apple Peel only. Programmable patterns are not
available.
VM16/ADTT16 (White Touch Tracker)
Supported Protocols SensorNet
RS-422
(1)
Maximum Presets 96 – SensorNet
4 – RS-422
Maximum Patterns
(2)
3
DirectSet Menu Not supported
Address Range 1-16
Notes:
(1) Requires RCSN422 code converter.
(2) Patterns are limited by time and the number of
available dome commands. Total time for each
pattern cannot exceed 6 minutes 50 seconds. Total
dome commands used in all patterns cannot exceed
99.
VM16E/ADTT16E (Black Touch Tracker)
Supported Protocols SensorNet
RS-422
(1)
Maximum Presets 96 – SensorNet
4 – RS-422
Maximum Patterns
(2)
3
DirectSet Menu Yes
(3)
Address Range 1-16 or 1-64
(3)
Notes:
(1) Requires RCSN422 code converter.
(2) Patterns are limited by time and the number of
available dome commands. Total time for each
pattern cannot exceed 6 minutes 50 seconds. Total
dome commands used in all patterns cannot exceed
99.
(3) Requires firmware version 0701-2833-0103
(EEPROM) / 0701-2834-0201 (Flash PROM) or
newer.
VM32/AD32
Supported Protocols SensorNet
RS-422
(1)
Maximum Presets 96 – SensorNet
4 – RS-422
Maximum Patterns
(2)
3
DirectSet Menu Not supported
Address Range 1-32
Notes:
(1) Requires RCSN422 code converter.
(2) Patterns are limited by time and the number of
available dome commands. Total time for each
pattern cannot exceed 6 minutes 50 seconds. Total
dome commands used in all patterns cannot exceed
99.
VM96
(1)
Supported Protocols SensorNet
RS-422
Maximum Presets Unlimited
(2)
Maximum Patterns
(3)
3
DirectSet Menu Not supported
Address Range 1-96
Notes:
(1) Requires software version 5.2 or newer.
(2) Preset information is stored at the host, not the dome.
(3) Patterns are limited by time and the number of
available dome commands. Total time for each
pattern cannot exceed 6 minutes 50 seconds. Total
dome commands used in all patterns cannot exceed
99.