Operator`s manual

AD2088 Operator's Manual
1-2
AD2088 Keyboard Overview
The AD2088 keyboard is comprised of the following elements:
A.
Site Display
- shows the number of the site entered with the
keypad when the
SITE key
(Sk)
is pressed.
10.
RUN key
- runs system and scratch pad tours.
B.
Monitor / VCR Display
- shows the number of the monitor
or VCR entered with the keypad when the
MON
(Mk)
or
VCR key
is pressed.
11.
MACRO keys –
Each of the eight macro keys calls a
specified macro whose number is entered on the numeric
keypad.
C.
Camera Display
- shows the number of the camera entered
with the keypad when the
CAM key
(Ck)
is pressed.
MULTI-FUNCTION KEYS
D.
Enter Display
- shows the number entered on the
NUMERIC KEYPAD
(E)
.
12.
OFF/Page Left key/ Stop
- turns off auxiliary device in
Monitor Operate mode. Displays page to left in Menu mode.
Stops VCR in VCR Operate mode.
E.
Numeric Keypad –
keys ranging from 0 to 9 that enable the
user to select specific cameras, monitors, salvos, tours,
presets, patterns, auxiliaries, recorders, sites, and macros.
13.
ON/Page Right key/ Record
- turns on auxiliary device in
Monitor Operate mode. Displays page to right in Menu mode.
Starts VCR recording in VCR Operate mode.
1.
Keyswitch
- enables the user to switch to the
Operate
,
Program
, or
Menu
modes of operation.
When the keyswitch
is set to
Menu
position, the page and cursor navigation
functions of the
multi-function keys
are activated.
14.
CLOSE/Page Up key/ Pause
- closes camera iris in
Operate
mode. Displays prior page up in
Menu
mode. Pauses VCR in
VCR Operate
mode.
2.
Joystick
- enables the user to pan, tilt, zoom and flip the
camera under keyboard control.
15.
OPEN/Page Down key/ Play
- Opens camera iris in
Monitor
Operate
mode. Displays next menu page down in
Menu
mode. Plays VCR in
VCR Operate
mode.
3.
PROG key
- enables the user to set scratch-pad tours and
patterns, as well as a number of other switching system
functions.
16.
NEAR/Left Arrow key/ Rewind
- Adjusts focus of near
objects in
Monitor Operate
mode. Moves cursor left one
character in
Menu
mode. Rewinds VCR in VCR Operate
mode.
4.
F1
&
F2 keys
- special functions keys used to implement
basic system commands and DeltaDome control
F1
&
F2
keys
- special functions keys used to implement basic
system commands and DeltaDome control
17.
FAR/Right Arrow / Fast Forward key
- Adjusts focus of
distant objects in
Monitor Operate
mode. Moves cursor right
one character in
Menu
mode. Fast Forwards VCR in
VCR
Operate
mode.
5.
LAST key
- calls the prior camera displayed in a sequence
(tour).
18.
VCR/Up Arrow key –
Enables selection of VCR mode of
operation
6.
NEXT key
- calls the next camera displayed in a sequence
(tour).
19.
ACK key /Down Arrow /Eject Key
- Acknowledges alarms,
runs tours, sets and repeats patterns. Ejects tape in VCR
Operate mode
7.
HOLD key
- Holds the current camera in a sequence (tour). 20.
PRESET/Enter key
- Calls presets in Operate mode. Sets
presets in Program mode. Stores entered menu data.
8.
SALVO key
- calls a specified salvo whose number is
entered on the numeric keypad.
21.
PATRN/Exit key
- runs and repeats patterns in Operate
mode. Sets patterns in Program mode. Exits Menu mode.
9.
CLEAR key
- clears data entered on the numeric keypad
A
F2
F1
SITE
VCR
RUN
1
23
9
OFF
ON
CL OS E
OPEN
NEAR FAR
SHOT
PAT RN
SI TE
MO N I TO R
CAMERA ENTER
CONTR OL
AUXILIARY
OPERA T E
PROGRA M
.
HOLD
SALV O
ACK
8
7
65
4
PROG
NEX TLAST
0CLE AR
MON
BLA CK
JACK
COUNT
ROOM
SLOTS
PIT
CRA P S
POKER
123
8
7
654
IRIS
FOCUS
TASK
ME NU
VCR
CAM
B
C
D
11
E
9
1
2
18
19
Mk
Ck
2120
6
5
3
Sk
4
10
7
8
16
17
15
12 14
13
PRE
SET