Operator`s manual

Using the AD2088 in Operate Mode
3-7
VCR Mode Operations
(keyswitch in operate position)
Selecting VCRs
To initiate VCR control, the operator performs the following actions:
1. Type a VCR number of up to four digits on the numeric keypad. [####]
2. Press the VCR key
In VCR mode, a horizontal line segment appears above the VCR display label
When VCR mode is selected, the multi-function keys (labeled “auxiliary”, “iris”, “focus”, and
“task”) switch to their VCR functions (Play, Record, Eject, Pause, Stop, Fast Forward, and
Rewind).
The VCR number appears in the MONITOR/VCR display.
3. Select a VCR function by pressing the appropriate key.
VCR FUNCTION KEY LABEL
STOP
OFF
RECORD
ON
PAUSE
CLOSE
PLAY
OPEN
REWIND
NEAR
FAST FORWARD
FAR
EJECT
ACK
To return to the monitor mode of operation, press the MON key. The switching system will
remember the number of the last VCR selected prior to toggling the mode.
MONITOR
VCR