Operator`s manual

RCTT16BE VM16 PLUS ENHANCED TOUCH TRACKER 8000-2672-01, REV. D1
INSTALLATION GUIDE
10 of 15
Enhanced Touch Tracker with Intellex 2.1
J-Box #1
DB9M
P1
P2
P3
P4
P5
P6
P8
Intellex 2.1
(with DB9 Connector)
DB9F
Straight-Thru Cable
PN: RPNR00
To Dome
Refer to instructions
included with device.
RJ45
RJ45
Primary
Touch Tracker
Secondary
Touch Tracker
COM 1 DB9 Connector
Call monitor feature board
is used if Secondary Touch
Tracker is installed.
Your system supports up to
2 controllers. Terminate E1
on the EIM that is on the
end point of the SensorNet
Network.
Straight-Thru Cable Wiring
EIM DB9F COM 2
2 Tx 2 Rx
3 Rx 3 Tx
5 Ground 5 Ground
J-Box P8
Color Pin Function
Orange 1 Host A
Yellow 2 Host B
Orange 3 Auxiliary A
Yellow 4 Auxiliary B
J-Box P1-P6
Color Pin Function
Orange 1 SensorNet A
White 2 28 Vac
Red 3 Ground
Black 4 28 Vac
Yellow 5 SensorNet B
The maximum combined
SensorNet cable length
is 1000m (3000ft).