Operator`s manual

MEGAPOWER 48 / ADTTE 8200-0170-05, REV. A
OPERATION AND PROGRAMMING REFERENCE GUIDE 30 of 43
Assigning Preset Titles to
Cameras/Presets
Each programmed preset title number must be
associated with a corresponding four-digit camera
(real or pseudo) number (1-9999) and a two-digit
preset number (1-96). The same preset title (and
preset title number) can be used multiple times for
different cameras. Use Preset/Preset Title
Numbers to assign the titles to a specific preset for
a selected camera.
PRE SET / PRESET TI TLE NUMBER
CAMERA - 0001
PRE SET PRESET TI TL E
01 0001 FRONTLOBBY
02 4096
03
04
05
06
07
MAI N ENTRANCE
???? ???????? ????????
???? ???????? ????????
???? ???????? ????????
???? ???????? ????????
???? ???????? ????????
To assign the preset title to a specific camera preset:
1. Enter a camera number (1-9999) and press
Enter (Shot).
2. Enter the preset title number (1-4096) and press
Enter (Shot).
The preset title previously programmed appears
to the right of the preset title number. The title
cannot be edited in this menu. The cursor
automatically moves to the next preset number.
Note: Entering a preset title number greater than
4096 (such as “9999”) removes the preset title
association.
3. Repeat steps 1 and 2 for each preset number
associated with the designated camera number.
When finished making changes, press Exit
(Pattern) to return to the previous menu.
Configuring User or
Keyboard Settings
The Users/Keyboards menu is used to set priority
levels for keyboards or users, to set user numbers
and passcodes, and to configure each of the eight
priority levels.
USE RS/ K EYBOARDS
1 KEYBOARD (USE R)
2 PRIORITY
• If User IDs are disabled in the System Options
menu, the first entry in the menu reads
Keyboard.
• If User IDs are enabled in the System Options
menu, the first entry in the menu reads User.
Changing User Settings
If User IDs are enabled, select User to set the
priority and passcodes for the 64 available users.
USE R
USER # - O1
PRIORI TY LEVEL: 8
PASSCODE:
XXXXXX
The following settings are available.
Setting Description
User #
User code number being configured.
Up to 64 users may be configured.
Priority
Level
Level of user privileges. Eight levels
are available.
Passcode
Number that authorizes use of the
system. Six digits may be used.