Operator`s manual

ManualsBrandsAmerican Dynamics ManualsComputer equipmentMegaPower 48

Table Of Contents

Using MegaPower® 48 Matrix Switcher with ADTTE Keyboard Cont

MEGAPOWER 48 / ADTTE 8200-0170-05, REV. A

OPERATION AND PROGRAMMING REFERENCE GUIDE 29 of 43

To change settings:

1. Move the cursor to the CAMERA number line.

Enter the camera number (real or pseudo), and

press Enter (Shot).

2. Press Enter (Shot) to toggle the Video Loss

setting. When the correct setting is displayed,

continue with step 3.

3. Change the camera title.

a. Press Next to move to the Title field. Two

cursors display: the Title Cursor and the

Selection Cursor.

b. Press Next to move the Title Cursor until the

correct character/position in the title is

highlighted.

Note: You must start from the first character

in the title and move through the text until the

desired character position is selected. You

cannot backspace through the title.

c. Use the joystick to position the Selection

Cursor over the letter, number, or symbol to

include in the title. Press Enter (Shot) to add

the selected character to the title.

d. Repeat steps 3b and 3c until the title is

complete.

4. When finished making changes, press Exit

(Pattern) to return to the previous menu.

Changing Preset Titles

Use Preset Titles to program a 2-line, 16-character

title that appears whenever a preset is displayed.

PRESET TI TLE- ????

TI TLE -

--------

A B CDE FGHI J K L MN

OPQRS TUV WXYZ a b

cdef ghi j kl mnop

qr st uvwxyz 012

3456789 <>: - . / ;

MP48 supports up to 4096 preset titles (96 presets

X 48 cameras). See Assigning Preset Titles to

Cameras/Presets for information about assigning

the title.

To program preset titles:

1. Enter a preset title number (1-4096), and press

Enter (Shot).

2. Change the preset title:

a. Move the cursor to the Title lines. Two