Operator`s manual
Table Of Contents
- Using MegaPower® 48 Matrix Switcher with ADTTE Keyboard Cont
- About this Guide
- About the MegaPower 48 Matrix Switcher/Controller System
- About the ADTTE Keyboard Controller
- Identifying the ADTTE Operating Mode
- General User Tasks
- Working in Keyboard Lock Mode
- Working in Program Mode
- Changing ADTTE Keyboard Settings
- Working in Menu Mode
- Changing System Settings
- Changing Monitor Settings
- Changing Camera Settings
- Configuring User or Keyboard Settings
- Configuring Switching Settings
- System Partitioning
- Configuring Alarms
- Declarations
MEGAPOWER 48 / ADTTE 8200-0170-05, REV. A
OPERATION AND PROGRAMMING REFERENCE GUIDE 22 of 43
Working in Menu Mode
STS MON CAM 1234
005 168 -M
Note: The keyboard lock must be disabled to use
this feature. To disable the keyboard lock, see
Unlock/Lock the Keyboard on page 14.
The Menu button allows you to view the main menu
of the attached switching system. When the main
menu for the switching system has been displayed,
the functions associated with the multi-function keys
are enabled. Table 10 lists the multi-function keys.
When you complete using the main menu, press
Menu. The multi-function buttons return to their
normal operating mode.
To view the menus:
1. Select a text display monitor (1-8) for viewing the
menus, and place the monitor on Hold.
IMPORTANT! Do not select a monitor that is
running a tour or salvo, or a monitor that is in an
alarm condition.
2. Press Menu.
3. If User IDs are enabled, enter the passcode for
the current user to access the menus.
Once the menu is displayed, the appropriate
functions on the multi-function keys are used for
operating the menus.
Note: The menu functions are printed beneath the
primary key function names on the ADTTE keypad
appliqué.
Table 11: Multi-Function keys description
Menu
Function
Key
label
Description
Page Left
Auxiliary
On
Displays the menu page
to the left.
Page Right
Auxiliary
Off
Displays the menu page
to the right.
Page Up
Iris
Close
Displays prior menu
page up.
Page Down
Iris
Open
Displays next menu
page down.
Left Arrow
←
Last
Moves cursor left one
character.
Right Arrow
→
Next
Moves cursor right one
character.
Up Arrow
↑
Run
Moves cursor up one
row.
Down Arrow
↓
Hold
Moves cursor down one
row.
Enter
Shot
Displays options for a
setting, and stores data
entered via the menu.
Exit
Pattern
Exits the current screen
and returns to the
previously displayed
screen.
Note: The Tracker Ball may also be used to change
the cursor position.
IMPORTANT! To store data in Menu mode, you
may press Enter (Shot) or Ack to end the
sequence.
Exiting from the Menu System
The user can exit from any menu, or exit from the
menu system at any time.
Task Command
Return to a prior menu. Press Exit (Pattern)
Exit from the menu system. Press Menu