Specifications

MEGAPOWER CPU 8200-0421-01, REV. E
INSTALLATION AND SERVICE GUIDE
1 of 34
MegaPower
®
CPU
Installation and Service Guide
Rx Tx
ADMPCPU
Contents
Overview........................................................................ 1
Safety Guidelines...........................................................
1
Installation .....................................................................
2
Single MPCPU (A)..................................................
2
Second MPCPU (B)................................................
2
Troubleshooting .............................................................
5
Specifications ................................................................
6
Declarations...................................................................
8
Appendix A: Hot Switch Setup.......................................
9
Appendix B: Detaching the MPU from the Port Module .
9
Appendix C: Basic ADMP3200 Matrix Switcher to
MPCPU Connection ............................................. 10
Appendix D: AD2088 Keyboard to MPCPU Connections
............................................................................. 11
Appendix E: ADCC200/300/1100 Keyboard to MPCPU
Connections..........................................................
15
Appendix F: ADTTE Controller to MPCPU Connections
............................................................................. 19
Appendix G: Intellex to MPCPU Connections..............
23
Appendix H: Computer to MPCPU Connections..........
27
Appendix I: MPCPU to Dome Connection Examples...
30
Appendix J: MPCPU Site-to-Site at 9600 Baud
Connection Examples...........................................
31
Appendix K: Flip Cable Connections ...........................
33
© 2008 Sensormatic Electronics Corp.
Overview
The MegaPower CPU (MPCPU) is the control unit
for the MegaPower 3200 CCTV matrix switcher.
The control unit:
• Enables setup and control of cameras,
monitors, users, alarms, video recording and
data communications
• Provides two AD data lines and 16 RS-232
COM ports
• When two MPCPUs are connected together,
they double the AD data lines and RS-232
ports, and provide “hot switch” CPU operation
• Runs on a 12Vdc external power supply.
The MPCPU consists of:
• MPU (Multiple Purpose Unit) module. Contains
the CPU and stores camera configuration data.
• Port module. Provides connections for camera
control data and CCTV input devices such as
keyboards.
Safety Guidelines
WARNING!
Installation and service is to be
performed by qualified personnel.
Wire in accordance with national wiring
regulations of the country of installation.
The unit is designed for use in general
purpose CCTV installations and has no
other function.
DO NOT exceed voltage and
temperature limits listed in these
instructions.
Use this unit in a clean, dust-free
environment.
The unit must be powered by the
provided Limited Power Source, certified
for the country of use.
!