Installation Guide

Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera Installation and Configuration
8200-1953-09 A0 90
Response Time Less than 50ms
Calibration Automatic calibration with Blackbody
Accuracy ±0.5°C with Blackbody calibration, over the range of 30 C to 42 C
Network
Network Protocol
TCP / IP, UDP, DHCP, NTP, RTSP, PPPoE, DDNS, SMTP, FTP, SNMP, UPnP,
Unicast, Multicast
Cyber Security HTTPS / IP Filter / IEEE 802.1X / Blacklist & white list / account security
Online Connection Support simultaneous monitoring for up to 10 users
API ONVIF, iAPI3
Interface
Network
RJ45
Audio 1CH audio input; 1CH built-in speaker
Alarm Alarm in/out, Built-in sound-light alarm
Hardware Reset Supported
Environmental
Operating Temperature
10°C ~ 35°C (50°F ~ 95°F)
Operating Humidity 10 % ~ 90 % relative (50% or lower recommended for accuracy)
Storage / transport
Temperature
-40°C ~ 60°C (-40°F ~ 140°F)
Ingress Protection IP40
Vandal Resistance -
General
Power Supply
(camera)
12VDC, 2A - For 12VDC power supply, use Phihong AC adaptor, model PMA36R-
120. (not provided)
PoE 48VDC, 0.35A - For PoE power, use AXIS Communications, AXIS T8134
MIDSPAN 60W, model 5900-331-01. (not provided)
Power Consumption <9W
Dimensions (LxWxH) 10.94 inches (278mm) x 3.78 inches (96mm) x 3.50 inches (89mm)
Material Aluminium
Net Weight Approx. 2.6lbs, 1.2Kg
Installation Wall mounting, Ceiling mounting, Tripod mounting
Certification
Certification testing is pending for major markets, including North America and the
European Union.