Installation Guide
Table Of Contents
- Warning
- Overview
- Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera
- Network Topology
- Network Connection
- Live View
- Search
- Configuration
- Appendix A - Shutdown Procedure
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Technical Specifications
- Appendix D - Manufacturer and Local Contact Information
- Disclaimer and Regulatory
- EMC Information
- End User License Agreement (EULA)
Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera Installation and Configuration
8200-1953-09 A0 83
Procedure 100 SD Card Management
1 Select Storage on the Web User Interface banner to view the Management tab.
2 You can format or Eject the SD card.
a Select the Format button to format the SD card. All data is cleared by selecting this but-
ton.
a Select the Eject button to stop writing data to SD card. Then the SD card can be ejected
safely.
You can divide the SD card up to hold a percentage of snapshots and videos.
3 Select the Snapshot Quota text box and enter a value. This percentage of the SD is
available for snapshots.
4 Select the Video Quota text box and enter a value. This percentage of the SD is available
for videos.
- End -
Procedure 101 Schedule a recording
1 Select Storage on the Web User Interface banner and then select the Record tab.
2 Select the Record Stream drop-down menu and select a stream.
3 Select the Pre Record Time drop-down menu and select a pre record time.
4 Select the Cycle White drop-down menu and select an option.
5 See the Schedule section in the Temperature Measurement Schedule section on page 41 for
assistance.
- End -
Procedure 102 Setting snapshot parameters
1 Select Storage on the Web User Interface banner and then select the Snapshot tab.
2 Select the Image Format drop-down menu and select an format.
3 Select the Resolution drop-down menu and select a resolution.
4 Select the Image Quality drop-down menu and select an image quality.
5 Select the Snapshot Interval text box and enter a number.
6 Select the Snapshot Quantity text box and enter a number.
Note:This is the maximum quantity of snapshots. The actual quantity of snapshots
may be less than this number. For example, if the occurrence time of an alarm event
is less than the time of capturing pictures, the actual quantity of snapshots is less
than the set quantity of snapshots.
7 Select the Enable Timing Snapshot check box to enable a snapshot interval.
8 Select the Snapshot Interval text box and enter a number.
9 You can schedule a time and date for when you want the recording to start, see the
Schedule section for assistance with this.
- End -