Installation Guide
Table Of Contents
- Warning
- Overview
- Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera
- Network Topology
- Network Connection
- Live View
- Search
- Configuration
- Appendix A - Shutdown Procedure
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Technical Specifications
- Appendix D - Manufacturer and Local Contact Information
- Disclaimer and Regulatory
- EMC Information
- End User License Agreement (EULA)
82 8200-1953-09 A0
Storage
In this section you can eject or format the SD Card and divide space up on the SD card between
snapshots and videos. You can set recording parameters and schedule the recording date and time.
You can set the format, resolution and quality of the image saved on the SD card, the snapshot
interval, quantity and snapshot timing. When you configure the Offline Record Settings feature and
once it detects a loss of connection with the recorder, it sends the video stream to the Micro SD card
within the unit. This satisfies the loss of video and continues recording. Once the recorder is back
online the camera initiates sending recorded video from the Micro SD card to the recorder. The
maximum time recording during the outage depends on the Micro SD card and the recorded stream
you selected. If the Micro SD reaches full capacity, it deletes video from earliest.
If an event action has record mode enabled, when triggered, the associated video is logged in the
event download table where it can later be downloaded from an Micro SD Card using the specified
upload protocol.
Figure 35 Storage settings menu page
Config
In this section you can eject or format the SD Card and divide space up on the SD card between
snapshots and videos. You can set recording parameters and schedule the recording date and time.
You can set the format, resolution and quality of the image saved on the SD card, the snapshot
interval, quantity and snapshot timing. When you configure the Offline Record Settings feature and
once it detects a loss of connection with the recorder, it sends the video stream to the Micro SD card
within the unit. This satisfies the loss of video and continues recording. Once the recorder is back
online the camera initiates sending recorded video from the Micro SD card to the recorder. The
maximum time recording during the outage depends on the Micro SD card and the recorded stream
you selected. If the Micro SD reaches full capacity, it deletes video from earliest.