Installation Guide
Table Of Contents
- Warning
- Overview
- Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera
- Network Topology
- Network Connection
- Live View
- Search
- Configuration
- Appendix A - Shutdown Procedure
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Technical Specifications
- Appendix D - Manufacturer and Local Contact Information
- Disclaimer and Regulatory
- EMC Information
- End User License Agreement (EULA)
Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera Installation and Configuration
8200-1953-09 A0 80
Procedure 97 Selecting a time zone and enabling daylight saving time
1 Select System on the Web User Interface banner to view the Date and Time option in the
menu list.
2 Select Date and Time to view the Zone tab menu.
3 Select the Zone drop-down menu and select a time zone.
4 Select the DST check box to enable DST.
5 Select Auto DST to automatically select the DST.
OR
Select Manual DST and then enter a Start Time and End Time.
6 Select the Time Offset drop-down menu and select an option.
7 Selct the Save button to save the settings.
- End -
Procedure 98 Setting the Date and Time
1 Select System on the Web User Interface banner to view the Date and Time option in the
menu list.
2 Select Date and Time and then the Date and Time tab.
You can synchronize the date and time with the NTP server, synchronize the date and time
with the computer or manually set the date and time. Select one of the following:
a To synchronize with the NTP server: select the Synchronize with NTP option and
then the NTP server text box and enter the IP Address. Select the Update period text
box and enter a number.
a To synchronize with the computer: select the Synchronize with computer time option
and then the Date text box and enter a date. Select the Time text box and enter a time.
a To set manually: select the Set Manually option and then the Date text box and enter a
date. Select the Time text box and enter a time.
3 Select the Save buton to save the settings.
- End -
Local Config
You can set up the storage path of captured pictures and recorded videos on the local PC. There is
also an option to enable or disable the bitrate display in the recorded files.
Procedure 99 Selecting a folder to save snapshots and recording files
1 Select System on the Web User Interface banner to view the Local Config option in the
menu list.
2 Select Local Config to view the Local Config menu.
3 Select the Save snapshots to Browse button and navigate to the folder that you want to
save the snapshots in.
4 Select the Save Recording file to Browse button and navigate to the folder that you want to
save the recording files in.