Installation Guide

Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera Installation and Configuration
8200-1953-09 A0 77
Select the Export Temp Data button to export the temperature data.
3 Select the Save button to save the settings.
- End -
Procedure 90 Restore settings to their factory default state
1 Select Maintenance on the Web User Interface banner to view the Backup and Restore
tab.
You can restore all settings to their factory default state or select specific settings that you
want to keep before you restore others settings to their factory default state.
2 Select the Load Default button to restore all settings to their factory default state.
Or
Select the check box of the settings that you do not want to restore to their factory default
settings and then select the Load Default button.
- End -
Reboot
You can reboot the camera.
Procedure 91 Rebooting the camera
1 Select Maintenance on the Web User Interface banner and then select Reboot.
2 Select the Reboot button the reboot the camera.
Note:This may take up to 5 minutes. Once successful the browser reconnects
automatically.
- End -
Procedure 92 Enabling a timed reboot
1 Select Maintenance on the Web User Interface banner and then select Reboot.
2 Select the Time Settings check box and then select a Date and Time.
3 Select the Save button to save the settings
- End -
Upgrade
You can update the camera firmware and the Novatel thermal driver.
Procedure 93 Updating the camera firmware
1 Select Maintenance on the Web User Interface banner and then select Upgrade.
2 Select the Browse button and navigate to the upgrade firmware file.
3 Select the Upgrade button to start upgrading the firmware.
The device restarts automatically.