Installation Guide

Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera Installation and Configuration
8200-1953-09 A0 73
3 Select the FTP settings that you want to delete.
4 Select the Delete button.
5 Select the Save button to save the settings.
- End -
Procedure 82 Testing FTP server settings
1 Select Network on the Web User Interface banner and then select More.
2 Select the FTP tab.
3 Select the FTP server settings in the list and then select the Test button.
4 Select the Save button to save the settings. A sample text file will be sent to the specified
FTP destination to confirm that FTP settings are correct.
- End -
HTTPS
HTTPs provide authentication of the web site and protects user privacy.
Procedure 83 Adding the default HTTPS certificate
1 Select Network on the Web User Interface banner and then select More.
2 Select the HTTPS tab.
Note:There is a certificate installed by default.
3 Select the Enable button to enable HTTPS configuration.
Note:When you enable HTTPS then a check box is visible to disable HTTP. Select
the check box to disable HTTP.
4 Select the Save button.
Note:The camera can be accessed by entering https://IP: https port via the web
browser (eg. https://192.168.226.201:443).
- End -
Procedure 84 Adding a private HTTPS certificate
A private certificate can be created if users don’t want to use the default one.
1 Select Network on the Web User Interface banner and then select More.
2 Select the HTTPS tab.
Note:There is a certificate installed by default
3 Select the Delete button to delete the default HTTPS certificate.
4 If you have a signed certificate, select the Browse button to naviagate to it and then select
Install to install it.
Or