Installation Guide
Table Of Contents
- Warning
- Overview
- Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera
- Network Topology
- Network Connection
- Live View
- Search
- Configuration
- Appendix A - Shutdown Procedure
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Technical Specifications
- Appendix D - Manufacturer and Local Contact Information
- Disclaimer and Regulatory
- EMC Information
- End User License Agreement (EULA)
Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera Installation and Configuration
8200-1953-09 A0 71
Note:When playing the video through the multicast streams in a VLC player, please
pay attention to the mode of the VLC player. If it is set to TCP mode, the video
cannot be played.
Note:If the coding format of the video of the main stream is MJPEG, the video may
be disordered at some resolutions.
Note:If “auto start” is enabled, the multicast received data should be added into a
VLC player to play the video.
9 Select the Save button to save the settings.
- End -
UPnP Discovery
Enable or disable UPnP Discovery on the camera.
Procedure 77 Enable or disable UPnP Discovery
1 Select Network on the Web User Interface banner and then select More.
2 Select the UPnP tab.
3 Select the Enable check box to enable and disable the UPnP Discovery.
- End -
E-mail
If you need to trigger Email when an alarm happens or IP address is changed, then set the e-mail
address here first.
Procedure 78 Configure e-mail settings
1 Select Network on the Web User Interface banner and then select More.
2 Select the Email tab.
3 Select the Sender Address text box and enter the e-mail address.
4 Select the User Name text box and enter the sender's user name.
5 Select the Password text box and enter the sender's password.
6 Select the Server Address text box and enter the SMTP IP address or host name.
7 Select the Secure Connection drop-down menu and select an option.
8 Select the SMTP Port text box and enter the port number.
9 Select the Send Interval check box and enter a number.
Note:For example, if this is set to 60 seconds and multiple motion detection alarms
are triggered within 60 seconds, they will be considered as only one alarm event and
only one email will be sent. If one motion alarm event is triggered and then another
motion detection alarm event is triggered after 60 seconds, two emails will be sent.