Installation Guide
Table Of Contents
- Warning
- Overview
- Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera
- Network Topology
- Network Connection
- Live View
- Search
- Configuration
- Appendix A - Shutdown Procedure
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Technical Specifications
- Appendix D - Manufacturer and Local Contact Information
- Disclaimer and Regulatory
- EMC Information
- End User License Agreement (EULA)
Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera Installation and Configuration
8200-1953-09 A0 69
DHCP and DNS service and the user wants only to access their camera within their own network.
By default, when making a DHCP request the camera transmits its hostname as part of the DHCP
request. This option is not user configurable. The cameras hostname matches the configurable
parameter “camera name” on the Web User Interface. Any DHCP request contains the cameras
hostname for use of the DHCP server to forward to an appropriate DNS server. You may need to
apply for and create a domain name before you procced with this section.
Procedure 73 Configure Dynamic DNS
1 Select Network on the Web User Interface banner and then select More.
2 Select the DDNS tab.
3 Select the Enable check box to enable DDNS configuration.
4 Select the Server Type drop-down menu and select a server type.
5 Select the User Name text box and enter a user name.
6 Select the Password text box and enter a password.
7 Select the Domain text box and enter the domain.
8 Select the Save button to save the settings.
- End -
IEEE 802.1X
The IEEE 802.1x security feature provides port based network access control i.e. securing corporate
networks from the attachment of unauthorized devices. Authentication is carried out through use of
the Extensible Authentication Protocol or EAP. Both PEAP and TLS methods are supported.
Procedure 74 Configure IEEE 802.1x security
1 Select Network on the Web User Interface banner and then select More.
2 Select the 802.1X tab.
3 Select the Enable check box to enable 802.1x configuration..
4 Select the Protocol Type drop-down menu and select a protocol type.
5 Select the EAPOL Version drop-down menu and select a version.
6 Select the User Name text box and enter a user name.
7 Select the Password text box and enter a password.
8 Select the Confirm Password text box and enter the domain.
9 Select the Save button to save the settings.
- End -
RTSP
Tyco Security Products does not support or is not responsible for any error caused during the use of
third party software used for RTSP playback