Installation Guide

68 8200-1953-09 A0
4 Select the Save button to save the settings.
- End -
Ports
In this section you can configure the ports.
Procedure 71 Configuring the HTTP, HTTPS, Data and RTSP ports
1 Select Network on the Web User Interface banner and then select More.
2 Select the HTTP Port text box and a number. The default HTTP port is 80. It can be
changed to any port which is not occupied.
3 Select the HTTPS Port text box and a number. The default HTTPs port is 443. It can be
changed to any port which is not occupied.
4 Select the Data Port text box and a number. The default data port is 9008. Please change it
as necessary.
5 Select the RTSP Port text box and a number. The default port is 554. Please change it as
necessary.
6 Select the Persistent connection Port text box and a number.
7 Select the Save button to save the settings.
- End -
Server
This function is mainly used for connecting to a network video management system.
Procedure 72 Connecting to a video management system
1 Select Network on the Web User Interface banner and then select More.
2 Select the Server tab.
3 Select the Enable check box to enable servere configuration.
4 Select the Server Port text box and enter ther server port number
5 Select the Server Address text box and enter the server address number.
6 Select the Device ID text box and enter the Server ID number.
7 Select the Save button to save the settings.
- End -
DDNS
Dynamic DNS is supported for updating, in real time a changing IP address on the Internet to provide
a persistent domain name for a resource that may change location on the network. RFC 2136
Dynamic Updates in the Domain Name System. In this situation the camera talks only to the DHCP
server and the DHCP server is responsible for updating the DNS server. The camera sends its
hostname to the DHCP server when requesting a new lease and the DHCP server updates the DNS
records accordingly. This is suitable for an intranet style configuration where there is an internal