Installation Guide

64 8200-1953-09 A0
2 Select the Kick-off button for any user to remove them.
- End -
Block and Allow lists
An administrator can block a user and or give them access to the camera.
Procedure 63 Blocking or enabling a user access
1 Select Security on the Web User Interface banner and then select Block and Allow from
the menu list.
2 Select the Enable address filtering check box.
3 Select the Block the following address option to block the user.
Or
Select the Allow the following address option to allow the user access.
4 Select one of the following options:
• IPv4
• IPv6
• MAC
5 Select the text box and enter the IP address or MAC address and then select the Save
button to save the settings.
- End -
Security Management
In order to prevent against malicious password unlocking,the 'locking once illegal login' function can
be enabled. If this function is enabled, after six unsuccessful login attempts the the login interface
locks. The camera can be logged in again after a half hour or after the camera reboots.
Procedure 64 Enable screen lock after six unsuccessful login attempts
1 Select Security on the Web User Interface banner and then select Security Management
from the menu list to view the Security Service tab.
2 Select the Enable ''locking once illegal login'' function check box.
3 Select the Save button to save the settings.
- End -
Procedure 65 Setting specific password criteria
1 Select Security on the Web User Interface banner and then select Security Management
from the menu list.
2 Select the Password Security tab.
3 Select the Password Level drop-down menu and select one of the following: