Installation Guide
Table Of Contents
- Warning
- Overview
- Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera
- Network Topology
- Network Connection
- Live View
- Search
- Configuration
- Appendix A - Shutdown Procedure
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Technical Specifications
- Appendix D - Manufacturer and Local Contact Information
- Disclaimer and Regulatory
- EMC Information
- End User License Agreement (EULA)
Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera Installation and Configuration
8200-1953-09 A0 61
6 Set the detectable face size by defining the maximum value and the minimum value in the
Min and Max text boxes. (The default size range of a single face image occupies from 3% to
50% of the entire image).
7 Optional - Select the Statistics check box to enable Statistics
• If enabled, you can see the statistical information in the live view inter-
face. If disabled, the statistical information will not be displayed in the
live view interface.
• A red box is visible on screen when Statistics is enabled. Click and
drag the red box with the mouse to change the position of the statistical
information displayed on the screen.
8 Select the Save button to save the settings.
Note:If the OSD content4 is enabled, then it will be disabled after you enable
Statistics.
- End -
Procedure 58 Schedule a target counting alarm
1 Select Alarm and Event on the Web User Interface banner and then select Face
Detection.
2 Select the Schedule tab.
3 See the Schedule section in the Temperature Measurement Schedule section on page 41 for
assistance.
- End -