Installation Guide
Table Of Contents
- Warning
- Overview
- Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera
- Network Topology
- Network Connection
- Live View
- Search
- Configuration
- Appendix A - Shutdown Procedure
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Technical Specifications
- Appendix D - Manufacturer and Local Contact Information
- Disclaimer and Regulatory
- EMC Information
- End User License Agreement (EULA)
6 8200-1953-09 A0
Warning
• This product is intended to be supplied by a Listed Power Unit, marked with 'Limited Power
Source', 'LPS' on unit, output rated minimum 12V/2 A or POE 48V/ 350mA or AC24V
(depending on models), no more than 2000m altitude of operation and Tma=60 Deg.C.
• Do not attempt to disassemble the camera; in order to prevent electric shock, do not
remove screws or covers.
• This product requires professional installation by a service technician with the appropriate
training and experience necessary to ensure proper installation and configuration for the
applicable operating environment and usage case to ensure the safe and accurate operation
of the product.
• There are no user-serviceable parts inside. Please contact the nearest service center as
soon as possible if there is any failure.
• Avoid shock, vibration and heavy pressing which can cause damage to the product.
• Do not use corrosive detergent to clean main body of the camera. If necessary, please use
soft dry cloth to wipe dirt; for hard contamination, use neutral detergent. Any cleanser for
high grade furniture is applicable.
• Do not operate it in case temperature, humidity and power supply are beyond the limited
stipulations.
• The thermal camera shall be used in a stable indoor environment without wind. Please
ensure the monitoring field is far away from objects that could produce airflow, high
temperature and reflection. Please do not install opposite to a door, air conditioner or any
place in sunshine.
• Please put up a tent or build a closed environment to ensure the accuracy for outdoor
installation.
• Please make sure the blackbody is installed opposite to the camera (where the camera can
see it).
• Avoid backgrounds that are too crowded or bright.
• This manual is for using and managing the product. We may reserve the rights of amending
the typographical errors, inconsistencies with the latest version, software upgrades and
product improvements, interpretation and modification. These changes will be published in
the latest version without special notification.
• Multiple Faces usage does not comply with IEC 80601-2-59.