Installation Guide
Table Of Contents
- Warning
- Overview
- Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera
- Network Topology
- Network Connection
- Live View
- Search
- Configuration
- Appendix A - Shutdown Procedure
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Technical Specifications
- Appendix D - Manufacturer and Local Contact Information
- Disclaimer and Regulatory
- EMC Information
- End User License Agreement (EULA)
58 8200-1953-09 A0
• Alarm Out: If enabled, the alarm output device will be triggered when
detecting abnormal temperature.
• Trigger Audio Alarm: If enabled, the warning voice will be triggered
when the temperature exceeds the set value. (Please set the warning
voice first. See Audio Alarm for details).
• Trigger Light Alarm: If enabled, the light of the camera will flash
when the temperature exceeds the set value. (Please set the light flash-
ing time and frequency first. See Light Alarm for details)
• Trigger SD Snap: If enabled, the system will capture images on
detecting abnormal temperature alarm and save the images on an SD
card.
• Trigger SD Recording: If selected, video will be recorded on an SD
card on detecting abnormal temperature alarm.
• Trigger Email: If “Trigger Email” and “Attach Picture” are checked
(email address must be set first in the Email configuration interface),
the captured pictures and triggered event will be sent into those
addresses.
• Trigger FTP: If “Trigger FTP” is checked, the captured pictures will be
sent into FTP server address. Please refer to FTP configuration
chapter for more details.
8 Select the Save button to save the settings.
- End -
Procedure 53 Configure a face detection area
1 Select Alarm and Event on the Web User Interface banner and then select Face
Detection.
2 Select the Area tab.
3 Select the Draw Area button and then click and drag the mouse over the video and draw
rectangular border lines.
Select the Clear button to delete the alarm area.
4 Set the detectable face size by defining the maximum value and the minimum value in the
Min and Max text boxes. (The default size range of a single face image occupies from 3% to
50% of the entire image).
5 Select the Save button to save the settings.
- End -
Procedure 54 Configure face detection advanced settings
You can choose the snapshot interval and number as needed to avoid capturing multiple similar
pictures in a short period of time.
1 Select Alarm and Event on the Web User Interface banner and then select Face
Detection.
2 Select the Advanced tab.
3 Select the Snapshot Interval drop-down menu and select the interal.