Installation Guide
Table Of Contents
- Warning
- Overview
- Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera
- Network Topology
- Network Connection
- Live View
- Search
- Configuration
- Appendix A - Shutdown Procedure
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Technical Specifications
- Appendix D - Manufacturer and Local Contact Information
- Disclaimer and Regulatory
- EMC Information
- End User License Agreement (EULA)
Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera Installation and Configuration
8200-1953-09 A0 53
Procedure 45 Configuring an exception detection sensitivity
The higher the value is, the more sensitive the system responds to the amplitude of the scene
change.
1 Select Alarm and Event on the Web User Interface banner and then select Exception.
2 Select the Sensitivity tab.
3 Move the slide-bar to increase or descrease the sensitivity.
4 Select the Save button to save the settings.
Note:The sensitivity value of Video Blur Detection: The higher the value is, the
more sensitive the system responds to the blurriness of the image.
Note:The sensitivity value of Video Color Cast Detection: The higher the value is,
the more sensitive the system responds to the obscuring of the image.
Note:Auto-focusing function should not been enabled for exception detection.
Note:Try not to enable exception detection when light changes greatly in the scene.
- End -
Line Crossing
Alarms will be triggered if the target crosses the pre-defined alarm lines.
Procedure 46 Configuring a line crossing detection.
1 Select Alarm and Event on the Web User Interface banner and then select Line Crossing.
2 Select the Enable check box to enable line crossing.
3 Select the Save Panoramic Picture: If it is enabled, the detected panoramic pictures will
be captured and saved to the SD card when there are targets detected.
4 Select the Save Target Cutout: If it is enabled, the detected target cutout pictures will be
captured and saved to the SD card when there are targets detected.
Note:To save snapshots to the local PC, please enable “Local Smart Snapshot
Storage” in the local config interface first. To save snapshots to the SD card, please
install an SD card first.
5 Select one of the following Detection Target check boxes to enable an alarm:
• Human: Alarms will be triggered if someone crosses the pre-defined
alarm lines.
• Motor Vehicle: Alarms will be triggered if a vehicle with four or more
wheels (eg. a car, bus or truck) crosses the pre-defined alarm lines.
• Motorcycle/Bicycle: Alarms will be triggered if a non-motor vehicle
(eg. a motorcycle or bicycle) crosses the pre-defined alarm lines.
Move the slide-bar to increase or descrease the sensitivity.