Installation Guide
Table Of Contents
- Warning
- Overview
- Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera
- Network Topology
- Network Connection
- Live View
- Search
- Configuration
- Appendix A - Shutdown Procedure
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Technical Specifications
- Appendix D - Manufacturer and Local Contact Information
- Disclaimer and Regulatory
- EMC Information
- End User License Agreement (EULA)
52 8200-1953-09 A0
3 Select the Flashing Frequency drop-down menu and select and option:
• Low
• Middle
• High
4 Select the OK button to save the settings.
- End -
Exception
This function can detect changes in the surveillance environment affected by the external factors.
Procedure 44 Configuring an exception detection.
1 Select Alarm and Event on the Web User Interface banner and then select Exception.
2 You can choose the following options by selecting the respective check-box:
• Scene Change Detection: Alarms will be triggered if the scene of the
monitor video has changed.
• Video Blur Detection: Alarms will be triggered if the video becomes
blurry.
• Enable Video Color Cast Detection: Alarms will be triggered if the
video becomes obscured.
3 Select the Alarm Holding Time drop-down menu and select an option.
4 Select the following check boxes to trigger that alarm:
• Alarm Out: If enabled, the alarm output device will be triggered when
detecting abnormal temperature.
• Trigger Audio Alarm: If enabled, the warning voice will be triggered
when the temperature exceeds the set value. (Please set the warning
voice first. See Audio Alarm for details)
• Trigger SD Snap: If enabled, the system will capture images on
detecting abnormal temperature alarm and save the images on an SD
card.
• Trigger SD Recording: If selected, video will be recorded on an SD
card on detecting abnormal temperature alarm.
• Trigger Email: If Trigger Email and Attach Picture are checked (email
address must be set first in the Email configuration interface), the cap-
tured pictures and triggered event will be sent into those addresses.
• Trigger FTP: If “Trigger FTP” is checked, the captured pictures will be
sent into FTP server address. Please refer to FTP configuration
chapter for more details.
5 Select the Save button to save the settings.
- End -