Installation Guide

Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera Installation and Configuration
8200-1953-09 A0 51
2 Select the Server Address text box and enter the server address.
3 Select the Port text box and enter the port number.
4 Select the Heartbeat drop-down menu and select an option.
5 Select the Heartbeat Interval and enter a number.
6 Select the OK button to save the settings.
- End -
Audio Alarm
Procedure 41 Configure an audio alarm
1 Select Alarm and Event on the Web User Interface banner and then select Audio Alarm.
2 Select the Language drop-down menu and select a language.
3 Select the Voice Content drop-down menu and select an option.
4 Select the Warnings Times text box and enter a number.
5 Select the Volume slider-bar and select the volume level.
6 Select the OK button to save the settings.
- End -
Procedure 42 Configure a customized audio alarm
1 Select Alarm and Event on the Web User Interface banner and then select Audio Alarm.
2 Select the Language drop-down menu and select Customize.
3 Select Browse and choose the file that you want to upload.
4 Select the Audio Name text box and enter a name.
5 Select Upload to upload the file.
Note:After you upload the audio file, you can select the audio name from the Audio
List. Select Listen to listen to the audio. Select Delete to delete the audio.
6 Select the Voice Content drop-down menu and select an option.
7 Select the Warnings Times text box and enter a number.
8 Select the Volume slider-bar and select the volume level.
9 Select the OK button to save the settings.
- End -
Light Alarm
Procedure 43 Configure a light alarm.
1 Select Alarm and Event on the Web User Interface banner and then select Light Alarm.
2 Select the Flashing Time text box and enter a number. The Flasing Time ranges from 1 - 60
seconds.