Installation Guide
Table Of Contents
- Warning
- Overview
- Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera
- Network Topology
- Network Connection
- Live View
- Search
- Configuration
- Appendix A - Shutdown Procedure
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Technical Specifications
- Appendix D - Manufacturer and Local Contact Information
- Disclaimer and Regulatory
- EMC Information
- End User License Agreement (EULA)
41 8200-1953-09 A0
Temperature measurement schedule
In this section you can schedule when the temperature measurement should be performed.
Figure 27 Temperature measurement schedule menu page
Procedure 26 Adding a weekly temperature schedule
You can set the alarm time from Monday to Sunday for a single week. Each day is divided in one hour
increments. Blue in Figure 22 means scheduled. No colour means that its unscheduled.
1 Select Temperature on the Web User Interface banner to view the Detection Config tab.
2 Select the Schedule tab to view the schedule menu.
3 Select Add for any day to schedule the temperature measurement and then click and drag
the mouse over the timeline to set the time.
Or
Select Manual Input for any day to select a specific start and end time. This adds more
granularities (minutes).
Note:Select Erase for any day to delete the schedule in step 3 and then click and
drag the mouse over the timeline to erase the time.
4 Select the Save button to save the settings.
- End -
Procedure 27 Adding a daily temperature schedule
You can set the alarm time for a special day, such as a holiday.
1 Select Temperature on the Web User Interface banner to view the Detection Config tab.