Installation Guide
Table Of Contents
- Warning
- Overview
- Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera
- Network Topology
- Network Connection
- Live View
- Search
- Configuration
- Appendix A - Shutdown Procedure
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Technical Specifications
- Appendix D - Manufacturer and Local Contact Information
- Disclaimer and Regulatory
- EMC Information
- End User License Agreement (EULA)
Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera Installation and Configuration
8200-1953-09 A0 40
Note:When the body temperature measured is higher or lower than the set value, it
will trigger alarms.
6 Select the Alarm Holding Time drop-down menu and select an option.
7 Select the following check boxes to trigger that alarm:
• Alarm Out: If enabled, the alarm output device will be triggered when
detecting abnormal temperature.
• Trigger Audio Alarm: If enabled, the warning voice will be triggered
when the temperature exceeds the set value. (Please set the warning
voice first. See Audio Alarm for details)
• Trigger Light Alarm: If enabled, the light of the camera will flash
when the temperature exceeds the set value. (Please set the light flash-
ing time and frequency first. See Light Alarm for details)
• Trigger Snap: If enabled, the system will capture images on detecting
abnormal temperature alarm and save the images on an SD card.
• Trigger SD Recording: If selected, video will be recorded on an SD
card on detecting abnormal temperature alarm.
• Trigger Email: If Trigger Email and Attach Picture are checked (email
address must be set first in the Email configuration interface), the cap-
tured pictures and triggered event will be sent into those addresses.
• Trigger FTP: If Trigger FTP is checked, the captured pictures will be
sent into FTP server address. Please refer to FTP configuration
chapter for more details.
8 Select the Save button to save the settings.
- End -