Installation Guide
Table Of Contents
- Warning
- Overview
- Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera
- Network Topology
- Network Connection
- Live View
- Search
- Configuration
- Appendix A - Shutdown Procedure
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Technical Specifications
- Appendix D - Manufacturer and Local Contact Information
- Disclaimer and Regulatory
- EMC Information
- End User License Agreement (EULA)
39 8200-1953-09 A0
Temperature
In this section you can set the temperature and an alarm type and schedule when the temperature
measurement should be performed.
Figure 26 Temperature settings menu page
Temperature measurement
In this section you can set the temperature and an alarm type.
Procedure 25 Configuring temperature measurements
1 Select Temperature on the Web User Interface banner to view the Detection Config tab.
2 Select the Enable check box to enable temperature measurement.
3 Select the Temperature Switch drop-down menu and select one of the following:
• Celsius
• Fahrenheit
4 Select the High Temperature Alarm check box and enter a value in the text box
5 Select the Low Temperature Alarm check box and enter a value in the text box.