Installation Guide
Table Of Contents
- Warning
- Overview
- Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera
- Network Topology
- Network Connection
- Live View
- Search
- Configuration
- Appendix A - Shutdown Procedure
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Technical Specifications
- Appendix D - Manufacturer and Local Contact Information
- Disclaimer and Regulatory
- EMC Information
- End User License Agreement (EULA)
Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera Installation and Configuration
8200-1953-09 A0 38
Video Mask
A maximum of four video masks can be setup.
Procedure 23 Adding a video mask
1 Select Image on the Web User Interface banner to view the View Mask option in the menu
list.
2 Select the Video Mask option to view the Video Mask menu.
3 Select the Enable check box to enable a video mask.
4 Select the Draw Area button and then drag the mouse over the video and draw the video
mask.
Note:Select the Clear button to remove the video mask.
5 Select the Save button to save the settings.
- End -
Region of Interest (ROI) Configuration
An area in the image can be set as a region of interest. This area will have a higher bitrate than the
rest of the image, resulting in better image quality for the identified area.
Procedure 24 Adding a region of interest
1 Select Image on the Web User Interface banner to view the ROI Config option in the menu
list.
2 Select the ROI Config option to view the ROI menu.
3 Select the Enable check box to enable a region of interest
4 Select the Draw Area button and then drag the mouse over the video and draw the region of
interest.
Note:Select the Clear button to remove the video mask.
5 Adjust the Level slide-bar to set the region of interst level on screen.
6 Select the Save button to save the settings.
- End -