Installation Guide
Table Of Contents
- Warning
- Overview
- Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera
- Network Topology
- Network Connection
- Live View
- Search
- Configuration
- Appendix A - Shutdown Procedure
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Technical Specifications
- Appendix D - Manufacturer and Local Contact Information
- Disclaimer and Regulatory
- EMC Information
- End User License Agreement (EULA)
37 8200-1953-09 A0
When “Talkback” is selected, the external audio output device will be used to output sound
for two-way talk. When “Warning” is selected, the external audio output device will be used
to output the pre-defined audio alarm.
7 Select the Speaker drop-down menu and select the following:
• Warning
When “Talkback” is selected, the built-in speaker will be used to output sound for two-way
talk. When “Warning” is selected, the built-in speaker will be used to output the pre-defined
audio alarm.
8 Select the Save button to save the settings.
- End -
On Screen Display (OSD)
In this section you can select the date format, enter a device name, add OSD content and picture
overlap here. After enabling the corresponding display and entering the content you can drag them to
change their position.
Procedure 21 Settings up on screen display
You can add the date, time and device name to the on screen display.
1 Select Image on the Web User Interface banner to view the OSD option in the menu list.
2 Select the OSD option to view the OSD menu.
3 Select the Date Format drop-down menu and select a date format.
4 Select the Show Timestamp check box to view the date on screen.
5 Select the Device Name text box and enter the name of the device.
6 Select the Show Device Name check box to view the device name on screen.
Note:You can move the on screen display around the screen.Click and hold the on
screen display to move it around the screen.
7 Select the Save button to save the settings.
- End -
Procedure 22 Uploading the on screen display settings
1 Select Image on the Web User Interface banner to view the OSD option in the menu list.
2 Select the OSD option to view the OSD menu.
3 Select the OSD Content 1 check box drop-down menu and select Picture Overlay from
the drop down menu.
4 Select Browse to select the overlap picture and then select Upload to upload the overlap
picture.
Note:The pixel of the image shall not exceed 200*200, or it cannot be uploaded.
5 Select the Save button to save the settings.
- End -