Installation Guide
Table Of Contents
- Warning
- Overview
- Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera
- Network Topology
- Network Connection
- Live View
- Search
- Configuration
- Appendix A - Shutdown Procedure
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Technical Specifications
- Appendix D - Manufacturer and Local Contact Information
- Disclaimer and Regulatory
- EMC Information
- End User License Agreement (EULA)
Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera Installation and Configuration
8200-1953-09 A0 36
7 Select the Video Quality drop-down menu and select an option. The higher the image
quality then more bitrate will be required.
Note:This option is only available when VBR is selected in step 5.
8 Select the I Frame Interval text box to enter a value for the I frame.
Note:I frame determines how many frames are allowed between a “group of
pictures”. When a new scene begins in a video, until that scene ends, the entire
group of frames (or pictures) can be considered as a group of pictures. If there is not
much movement in the scene, setting the value higher than the frame rate is fine,
potentially resulting in less bandwidth usage. However, if the value is set too high,
and there is a high frequency of movement in the video, there is a risk of frame
skipping.
9 Select the Video Compression drop-down menu to select the video compression type.
Note:H264, H265, and MJPEG are optional.
Note:If H.265 is chosen, make sure the client system is able to decode H.265
10 Select the Profile drop-down menu to select the profile type. For H.264. Baseline, main and
high profiles are selectable.
11 Select the Send Snapshot drop-down menu to select the number of snapshots to generate
for an event.
12 Select the Video encode slice split check box to ensure a smooth image even when using
the low-performance computer.
13 Select the Watermark check box to enable this option when playing the local recorded video
in the search interface.
14 Select the Watermark content text box and enter a description.
15 Select the Save button to save the settings.
- End -
Procedure 20 Configuring the audio settings
1 Select Image on the Web User Interface banner to view the Video / Audio option in the
menu list.
2 Select the Video / Audio option and then the Audio tab to view the audio menu.
3 Select the Enable check box to enable audio.
4 Select the Audio Encoding drop-down menu and select one the following:
• G711A
• G711U
5 Select the Audio Type drop-down menu and select the following:
• LIN
6 Select the Speaker drop-down menu and select the following:
• Warning