Installation Guide
Table Of Contents
- Warning
- Overview
- Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera
- Network Topology
- Network Connection
- Live View
- Search
- Configuration
- Appendix A - Shutdown Procedure
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Technical Specifications
- Appendix D - Manufacturer and Local Contact Information
- Disclaimer and Regulatory
- EMC Information
- End User License Agreement (EULA)
35 8200-1953-09 A0
Note:Select Cancel to undo any changes.
- End -
Procedure 18 Scheduling when certain camera parameters should be used
1 Select Image on the Web User Interface banner to view the Camera Parameters tabs.
2 Select the Schedule tab to view the schedule menu.
3 Select the Schedule drop-down menu and one of the following:
• Full Time for common, day, night mode
• Timing to enter a time.
Note:When Timing is selected then you must click and drag the Timing Range
slide-bar to enter the time.
4 Select the Config File drop-down menu and select one of the following:
• Common
• Day
• Night
• Auto
5 Select the Save button to save the settings.
- End -
Video / Audio
In this section you can set the video and audio settings.
Procedure 19 Configuring the video settings
Four video streams can be adjusted at the same time.
1 Select Image on the Web User Interface banner to view the Video / Audio option in the
menu list.
2 Select Video / Audio to view the Video tab to view the video menu.
3 Select the Resolution drop-down menu and select the size of the image.
4 Select the Frame Rate text box to enter a value for the frame rate.
5 Select the Bitrate Type drop-down menu and select one of the following:
• CBR - no matter how much change is seen in the video scene, the com-
pression bitrate will be kept constant.
• VBR - the compression bitrate will be adjusted according to scene
changes. For example, for scenes that do not have much movement,
the bitrate will be kept at a lower value. This can help optimize the net-
work bandwidth usage.
6 Select the Bitrate(Kbps) drop-down menu and select an option.
Note:This option is only available when CBR is selected in step 5.