Installation Guide
Table Of Contents
- Warning
- Overview
- Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera
- Network Topology
- Network Connection
- Live View
- Search
- Configuration
- Appendix A - Shutdown Procedure
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Technical Specifications
- Appendix D - Manufacturer and Local Contact Information
- Disclaimer and Regulatory
- EMC Information
- End User License Agreement (EULA)
Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera Installation and Configuration
8200-1953-09 A0 34
• Saturation: Set the degree of color purity. The purer the color, the
brighter the image is.
• Sharpness: Select the Sharpness check box and then set the res-
olution level of the image plane and the sharpness level of the image
edge.
• Noise Reduction: Select the Noise Reduction check box and set
the noise reduction value. Decrease the noise and make the image
more thorough. Increasing the value will make the noise reduction
effect better but it will reduce the image resolution.
• Defog: Select the Defog check box and set the defog value. Activ-
ating this function and setting an appropriate value as needed in foggy,
dusty, smoggy or rainy environment to get clear images.
4 Select an option from the drop-down menu for each of the following:
• Backlight Compensation (BLC):
Off: disables the backlight compensation function. It is the default mode.
HWDR: WDR can adjust the camera to provide a better image when there are both
very bright and very dark areas simultaneously in the field of the view by lowering
the brightness of the bright area and increasing the brightness of the dark area.
Recording will be stopped for a few seconds while the mode is changing from non-
WDR to WDR mode.
HLC: lowers the brightness of the entire image by suppressing the brightness of the
image’s bright area and reducing the size of the halo area.
BLC: If enabled, the auto exposure will activate according to the scene so that the
object of the image in the darkest area will be seen clearly.
• Antiflicker:
Off: disables the anti-flicker function. This is used mostly in outdoor installations.
50Hz: reduces flicker in 50Hz lighting conditions.
60Hz: reduces flicker in 60Hz lighting conditions.
• Smart IR: Choose “ON” or “OFF”. This function can effectively avoid
image overexposure and underexposure by controlling the brightness
of the IR lights according to the actual conditions to make the image
more realistic. Please enable it as needed.
• White Balance: Adjust the color temperature according to the envir-
onment automatically.
• Frequency: 50Hz and 60Hz can be optional.
• Day/Night Mode: Choose “Auto”, “Day”, “Night” or “Timing”.
• Infra-red Mode: ''On'' or ''Off''.
• Gain Mode: Choose “Auto” or “Manual”. If “Auto” is selected, the gain
value will be automatically adjusted according to the actual situation. If
“Manual” is selected, the gain value shall be set manually. The higher
the value is, the brighter the image is.
• Gain Limit: Adjust the slide-bar to increase or decrease the value.
Note:To restore the settings to their default value then select the Default button.