Installation Guide
Table Of Contents
- Warning
- Overview
- Tyco Illustra Pro 5MP Thermal Elevated Skin Temperature Detection Camera
- Network Topology
- Network Connection
- Live View
- Search
- Configuration
- Appendix A - Shutdown Procedure
- Appendix B: Using Media Player to View RTSP Streaming
- Appendix C: Technical Specifications
- Appendix D - Manufacturer and Local Contact Information
- Disclaimer and Regulatory
- EMC Information
- End User License Agreement (EULA)
33 8200-1953-09 A0
Image
In this section you can configure the display settings, video and audio, on-screen display, video
mask and regions of interest.
Figure 25 Image settings menu page
Display Settings
In this section you can adjust the camera parameter settings and schedule image parameters
settings.
Procedure 17 Adjusting the camera parameters
1 Select Image on the Web User Interface banner to view the Camera Parameters tab.
2 Select the Config File drop-down menu and select one of the following:
• Common
• Day
• Night
3 Adjust the slide-bar to select a value for the options in the list below:
• Brightness: Set the brightness level of the camera’s image.
• Contrast: Set the color difference between the brightest and darkest
parts.
• Hue: Set the total color degree of the image.