Installation Guide

Illustra Pro Gen 4 2MP, 4MP and 8MP Domes Installation and Configuration Guide
8200-2007-08 A0 96
4 Select Refresh to refresh the log for the most up-to-date information.
- End -
Procedure 112 Filter the Security Log
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Security Status from the Security menu.
3 Select the Security Log tab.
4 Enter the number of lines of the log file you would like to view in the Lines (from the end of
the log file) text box.
5 Enter the word or phrase that you would like to search for in the Filter (only lines
containing text) text box.
6 Select Refresh to refresh the log for the most up-to-date information that meets the filter
parameters.
7 Select Clear to empty the log of its current entries. You will be required to enter your
password to do this.
- End -
Users
In this section you are able to add a user, change a user password and a delete user account. There
are three levels of access: admin, operator and user.
Note:The default Username is admin and the default Password is admin. To maintain security the
password on the admin account should be changed.
View Current User Accounts
View a list of the current user accounts assigned to the camera.
Procedure 113 View User Accounts
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Users from the Security menu.
The current user accounts assigned to the camera display.
- End -