Installation Guide

74 8200-2007-08 A0
Procedure 83 Enable/Disable Alarm Output
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Alarm I/O from the Event and Actions menu.
3 Select the Output check box to enable alarm output.
OR
Clear the Output check box to disable alarm output.
- End -
Procedure 84 Clearing Alarm Output
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Alarm I/O from the Event and Actions menu.
3 Under Alarm Output, select the Apply button to Clear Active Output.
The Alarm Output is cleared.
- End -
Analytics
Analytics is a feature which detects and tracks objects in video. Analytics supported are Region of
Interest, Face Detection , Motion Detection, Video Intelligence, AI Object Classification and Blur
Detection.
Region of Interest (ROI)
A region of interest is a defined area of the camera view which considered to be higher priority than
areas of non-interest. For example, in secure environments, areas of potential activity could be a
specific door or window. They are specified by drawing a rectangular overlay on the video stream.
The overlay is highlighted in green and an OSD is displayed outlining the size % for the x and y axis.
Up to five regions of interest can be configured, all of which can be enabled / disabled.
Procedure 85 Configure a Region of Interest
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Analytics from the Events and Actions menu.
The ROI tab displays.
3 Use the drawing tools to draw the region of interest overlay on the video stream.
4 Enter the name of the region of interest in the Name text box.
5 Select the Enabled check box to enable the region of interest.
OR
Clear the Enabled check box to disable the region of interest.
6 Click Add. The region of interest is configured.