Installation Guide

Illustra Pro Gen 4 2MP, 4MP and 8MP Domes Installation and Configuration Guide
8200-2007-08 A0 69
File Transfer Rate
You can limit the File Transfer Rate and assign a max transfer rate to manage the amount of FTP
bandwidth used.
Procedure 74 Configure the FTP Transfer Rate
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Event Settings from the Events and Actions menu.
3 Select the FTP tab.
4 Select the Limit Transfer Rate check box to limited the FTP transfer rate.
OR
Deselect the Limit Tranfer Rate check box to disable limited FTP transfer.
The default setting is ‘Enabled’.
5 Enter the Max Transfer Rate in the Max Transfer Rate (Kbps) textbox.
- End -
Test FTP Settings
Test that the FTP settings are configured corretly.
Procedure 75 Test the FTP Settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Event Settings from the Events and Actions menu.
3 Select the FTP tab.
4 Select Test.
A sample text file is sent to the specified FTP destination to confirm that FTP settings are
correct.
- End -
CIFS
The CIFS feature permits files generated from the camera such as alarm related video to be directed
to network attached file storage through the Common Internet File System protocol. This
supplements existing distribution methods such as FTP, SFTP and email.
Procedure 76 Configure CIFS Server Settings
Step Action
1 Select Setup on the Web User Interface banner to display the setup menus.
2 Select Event Settings from the Events and Actions menu.
3 Select the CIFS tab.
4 Select the Enable check box to enable CIFS.