User`s guide

Advanced Features
User’s Guide 35
Monitoring Hard Drive Health
Intellex now offers a feature to monitor and anticipate whether a hard drive's health is failing, and if
so, notify the user. The drive attributes that Intellex monitors are manufacturer-specific, so these
vary for each user’s system. Problems include reliability, temperature, and volume errors. If one of
these screens appears, click Storage Setup.
Solutions include:
• Replacing the affected hard drive as soon as possible.
• To correct a temperature problem, make sure that the ambient air temperature around the
Intellex case is less than 35
o
C (95
o
F), the internal cooling fans are operating properly, and
there is adequate air flow around the case.
Note
The system also alerts the user via email notification when it has detected an unhealthy drive.
Refer to Setting Up Email Notification in the chapter on Configuring the Intellex in the Installation
and Configuration Guide.
Exiting Intellex
Since Intellex uses the Windows operating system, to configure the regional, mouse, time zone,
network, printer, and language settings, you must exit to Windows. In addition, you must exit from
Intellex to Windows to change PAL/NTSC settings.
Note
Windows screens appear in English, regardless of the language version of Intellex. Consult
Microsoft Windows Installation instructions for setting the operating system to another language.
Exiting to Windows is a protected feature. You must have the Exit to System privilege to access it.
Exiting to Windows
1 From the main screen, click Utility. The Utility Options screen appears.
2 Click Exit. A confirmation message appears.
3 Click Yes to exit to Windows. The Enter PIN Code screen appears.
4 Enter the system exit code. (Contact your dealer or system administrator for this code.)
5 Click OK to exit to the Windows operating system.