Specifications

1
Setting Up Network Client
Installation Requirements
See the printed Network Client Quick Setup Guide for installation procedures.
• For quick setup and verification of Network Client and Intellex interaction, connect Network
Client and Intellex on the same network node (same subnet).
• For Intellex IP, a dedicated network is recommended.
• See your System Administrator before connecting Intellex units to your network and accessing
those units from Network Client workstations. Contact your dealer for Technical Support.
Minimum System Requirements
Setting Up Network Connections
See your network administrator before you install Network Client and Intellex units on your
network.
Computer Pentium-3 800 MHz processor
Pentium Celeron or Pentium-4 preferred
Use only Intel processors
CPU support of SSE instruction set
Operating System Windows XP Home Edition and Professional
Windows 2000 Professional
Windows NT 4.0 Workstation and Server with SP6a
RAM 128 MB
Hard Drive 20 MB for software installation; minimum 10 GB for video storage
Other Drives CD-ROM drive for installation
Monitor 800 × 600 resolution and capable of displaying 16-bit color
Video Card SVGA with 16 MB video RAM
DirectDraw support
Network Card Must support 10BASE-T (10 Mbps) and/or 100BASE-TX (100 Mbps) operation;
and match the network configuration. The Intel PRO/100+, the 3Com 3C905B, and
Netgear FA310TX are qualified.
Miscellaneous Mouse or other pointing device
56 K modem (for dial-up access to Intellex)