Specifications

Dial Up Connections
Configuration Guide 55
Windows ME Dial-Up
Verify the modem installation
1 Select Start > Settings > Control Panel.
2 Double-click Modems.
If Location Information appears, enter the area code. Click OK.
If a modem is not listed, contact your PC vendor for instructions on installing modem drivers.
Establish dial-up networking
1 Click the Diagnostics tab.
2 Select the COM port that corresponds to your modem.
3 Click More Info.
Diagnostic information appears. If it states that the port could not be opened, or the port is
busy, contact your PC vendor for support.
4 Click OK to exit More Info.
5 Click OK to exit Modem Properties.
6 Double-click Add/Remove Programs in the Control Panel.
7 Click the Windows Setup tab.
8 Click Communications, then click Details.
9 Check the Dial-Up Networking box.
10 Click OK to close Communications.
11 Click OK to close Add/Remove Programs Properties.
If you just installed Dial-Up Networking (see step 9), reboot and proceed to the next step.
If Dial-Up Networking is already installed, proceed to the next step without rebooting.
12 Double-click Dial-Up Networking then Make New Connection.
13 Enter a name for the computer you are dialing. Click Next.
14 Enter the area code, telephone number, and country or region code for the Intellex unit you are
dialing. Click Next. Click Finish. A dial-up icon is created in the Networking folder.
15 In Dial-up Networking, right-click the dial-up icon associated with your Intellex. Click Properties.
16 Click the Networking tab.
17 Under Advanced Options:
a Select Enable software compression.
b Clear Record a log file for this connection.
18 Under Allowed network protocols:
a Select TCP/IP.
b Clear NETBEUI and IPX/SPX Compatible.
c Click OK.
19 Click the Security Tab. Enter the user name and password. Click OK.
20 In Dial-up Networking, double-click the dial-up icon associated with your dial-up.
21 Enter the user name and password. Click Connect to access the remote Intellex unit.