Specifications

53
Appendix A: Dial Up Connections
Windows NT 4.0 Dial-Up
Verify modem installation
1 Select Start > Settings > Control Panel.
2 Double-click Modems.
If a modem is not listed, contact your PC vendor for instructions on installing modem drivers.
3 Click Close.
Establish dial-up networking
1 Double-click Network in Control Panel.
2 Click the Services tab.
3 Remote Access Service should be listed. If it is not, click Add, select Remote Access Service.
Click OK. You may be prompted to insert the Windows NT install CD. Enter the full path,
including the drive and directory.
4 You are prompted to Add a RAS-Capable Device. Select your modem from the list. Click OK.
5 Click Configure in the remote Access Setup box. Ensure that Dial Out Only is selected under
Port Usage and click OK.
6 Click Continue. Do not change settings on this page. Click OK.
7 Click Close. If you are prompted to reboot your computer, do so now.
8 Close the Control Panel.
9 Double-click My Computer.
10 Double-click Dial-Up Networking.
11 If a message requests your area code, enter the area code and click Close. If not, continue to
the next step.
12 You may see a message: The phone book is empty. Click OK.
13 Enter a name for the computer you are dialing (to distinguish between multiple dial-up
settings). Click Next.
14 Select I am calling the Internet and Send my plain text password if that’s the only way to
connect. Click Next.
15 Enter the phone number of the Intellex you are dialing. Click Next.
16 Click Finish.
17 A Dial-up Networking dialog appears. Verify the phone number. If it is incorrect, re-enter it. Click
Dial. Enter the user name and password; leave the domain blank.
Windows 98 Dial-Up Setup
Verify the modem installation
1 Select Start > Settings > Control Panel.
2 Double-click Modems.