Specifications

Setting Up Intellex Units
44 Network Client
• Ensuring that video can be viewed using the device manufacturer’s viewer
1 Select the Intellex IP unit in Instruments view.
2 Click Unit Setup or select Actions > Instrument Setup.
3 Click Login and enter your PIN if security is enabled.
4 Click the IP Sources tab.
5 Set up parameters for each IP device and each channel of video supported by a device.
6 Click Add to add an IP source, or Edit to change an IP source
IP addresses
Intellex IP camera numbers that are currently
assigned
Server Type depends on
device category
Communications Port of
IP device; typically 80
for an Axis
camera/server
IP address of an IP
device
User name and
password for
authentication when
requesting video from
an IP device
A Name for each video
stream
A video source to Intellex
camera
Resolution for each
video stream
IP source quality setting
for each video stream
Maximum allowable
image Rate for each
video stream
Protocol for each IP
device
Address for each video
stream; use only if
camera control is set to
use Sensormatic RS-422
protocol