Specifications

Setting Up Intellex Units
Configuration Guide 43
5 Click OK.
Setting Up a Dome Camera
1 Select the camera and click the Dome Symbol.
2 Click Configuration Menu.
The items on the Dome Configuration Menu vary depending on the dome camera you select.
See the dome camera’s documentation for information regarding functions that are present on
the menu.
3 Click Pan/Tilt to navigate and Focus In to select the camera.
4 Navigate to items in the menu using Pan/Tilt, select the items with Focus In, then use Zoom In
to modify the values.
5 Accept or reject the modified values.
6 To do this, click Pan/Tilt to navigate through the dome menu. Click Focus In to select a save
option. Use Zoom In to indicate Yes or No, then click Focus In again to accept or reject the
values.
7 Repeat steps –4 until the camera is configured then exit the menu.
Setting Up IP Sources
Before adding it to the Intellex IP application, configure the IP device according to the
manufacturer’s instructions including:
• Assigning an IP address or device name
Colors correspond
to the recording rate
for an alarmed
camera.
Slide each bar
separately, or grab
the bottom gray bar
to slide 2 to 3 bars
together.
Sets all cameras back to
default settings (7.5 ips
(NTSC) or 6.25 ips (PAL).