Specifications

Setting Up Intellex Units
42 Network Client
Setting Up Auto Rate Mode
1 From the Setup Options screen, click Rate.
2 Click Use Auto Rate Mode.
3 Choose a Normal Rate.
4 Choose an Alarm Rate.
5 In Single Camera Schedule mode, choose a single camera rate.
6 Click OK.
Setting Up Camera Selectable Rate
Use Camera Selectable Rate to individually set the recording rate for each camera. The lowest
possible recording rate per camera is 0.93 ips (NTSC) or 0.78 ips (PAL). The highest recording
rate for any single camera is 30 ips (NTSC) or 25 ips (PAL), regardless of the overall system
recording rate.
1 From the Setup Options screen, click Rate.
2 Click Use Camera Selectable Rate Mode.
3 From the Per Camera Rate tab, move the rate slider for each active camera set the rates.
4 Adjust the Minimum, Normal, and Alarm rates individually by adjusting the section of the
corresponding slider.
Configured Minimal Rate The minimum rate you configured for a camera. It is any value between
the minimum rate of 0.93 ips (NTSC)/0.78 ips (PAL) and the Configured
Normal Rate.
Configured Normal Rate The desired normal rate for a camera that is not in the alarmed state. This
is guaranteed only when there are no alarmed cameras.
If no cameras are alarmed, the normal rate equals the actual rate.
Configured Alarm Rate The maximum alarm rate you configured for a camera. If no other
cameras are alarmed, the configured alarm rate equals the actual rate.
Actual Rate The camera’s actual recording rate.
If there are no alarmed cameras, the actual rate is the configured normal
rate of that camera.
If the camera is the only alarmed camera, its actual rate is the configured
alarm rate.
If other cameras are alarmed, this rate is not guaranteed.
Term Description