Specifications

Setting Up Intellex Units
Configuration Guide 35
1 From the Call Monitor tab, select Call to view live video from a single camera or Spot to view
live video from alarmed cameras in sequence.
2 Select Main if a Touch Tracker controls the main monitor or Secondary if it controls the call
monitor (via a serial connection).
3 Choose the call camera that the call monitor displays.
4 Click OK.
Setting Up the Archive Schedule
To use Archive Schedule, attach a mass storage device such as DAT.
Archiving All
1 From the Setup dialog, click Archive Schedule.
2 From the Mode tab, click Archive All to configure the same archive schedule for all cameras,
every day of the week.
3 Select the Time tab and set start times for day and night operation.
Setting up a Custom Archive Schedule
1 From the Setup dialog, click Archive Schedule.
2 From the Mode tab, click Archive Schedule. You can choose Include Weekend and Include
Holiday.
3 If you are using weekend or holiday schedules, click the Time tab.
a In the Weekend Days box, choose the weekend days to include in the schedule.
b Select start and end times for weekends and holidays
4 Select a tab for the schedule (Weekday, Weekend, and Holiday).
a To select archiving for the entire day every weekday, click Archive all.
b To schedule specific archiving time, click Archive Alarmed then click and drag to highlight
the time block for archive alarmed scheduling.
c To disable archiving, click Disabled then click and drag to highlight the time block for
disabled scheduling.
5 Repeat step 4 for each configuration.