Specifications

Setting Up Intellex Units
28 Network Client
6 Repeat steps 2–5 for the Night Filter.
Setting Up Perimeter Detection
1 From the Setup dialog, click Schedule.
2 From the Camera 1-8 and 9-16 tabs, choose Day Filter > Perimeter Detection.
3 Click Setup.
4 In the draw zone, click and draw the target area. The shape must form an enclosed boundary.
5 Adjust sensitivity with the Sensitivity slider. Click Apply.
The perimeter detection filter allows only one detection area.
6 Repeat steps 2–5 for the Night Filter.
Setting Up Light Change
1 From the Setup dialog, click Schedule.
2 From the Camera 1-8 and 9-16 tabs, choose Day Filter > Light Change.
3 Click Setup.
4 In the draw zone, click and draw the target area. The shape must form an enclosed boundary.
5 Adjust the sensitivity with the Sensitivity slider. Click Apply.
Draw zone
Slider
Draw zone