Specifications

Setting Up Intellex Units
Configuration Guide 21
4 Select the PTZ Triggers tab, then click Add.
5 From the Alarm Camera list, select the alarmed camera that you want to trigger a response.
6 Select one or more alarm types to trigger the response. You must select at least one alarm
type.
7 From the PTZ Camera list, select the camera that you want to respond to the alarm trigger. This
list includes only cameras that you have configured as PTZ.
8 Select a PTZ action, and select the position or pattern number from the respective drop-down
list.
9 Click OK.
Note
If there are any invalid conditions, an error message appears. Close the error dialog and
correct the errors before re-trying.
If another camera control session is already controlling the camera, the new triggered action
fails and registers in the Activity Log. The category is called Surveillance, and the activity is
called Camera Control.